Computer Aided Manufacturing (5 ECTS)
Code: TX00BU82-3014
General information
- Enrollment
- 03.05.2021 - 06.06.2021
- Registration for the implementation has ended.
- Timing
- 23.08.2021 - 17.12.2021
- Implementation has ended.
- Number of ECTS credits allocated
- 5 ECTS
- Mode of delivery
- On-campus
- Unit
- (2016-2018) Automotive and Mechanical Engineering
- Campus
- Leiritie 1
- Teaching languages
- Finnish
- Degree programmes
- Mechanical Engineering
Objective
On completion of the course, the student will be able to use 2,5 -, 3 - and 5-axis tool paths for machining center using 3D volume and surface models for the path making.
The student will be able to simulate and post-process a path into an ISO code NC programme and to run the programme with a machine tool.
The student will be able to choose suitable tools and machining values for the programme to reach the required accuracy and surface roughness taking the machining costs and processing time into consideration.
Content
1. 3D model creation and transfer to the CAM program
2. 2.5-axis tool paths
3. 3-axis tool paths form surfaces
4. 3 +2 axis tool paths
5. 5-axis tool paths
Evaluation scale
0-5
Assessment criteria, satisfactory (1)
The student is able to do 2,5 - and 3-axis tool paths with a 3D volume model, simulate, post-process and operate them with a machining center.
Assessment criteria, good (3)
The student is able to do 2,5 - , 3-, 3+2-axis tool paths with a 3D volume model, simulate, post-process and operate them with a machining center.
Assessment criteria, excellent (5)
The student is able to do 2,5 - , 3-, 3+2-axis tool paths with a 3D volume model, simulate, post-process and operate them with a machining center.
Assessment criteria, approved/failed
The student is able to do 2,5 - and 3-axis tool paths with a 3D volume model, simulate, post-process and operate them with a machining center.
Qualifications
Product design and manufacturing methods
3D modeling and CAE