Skip to main content

Basics Electric Installations of Automation (5 ECTS)

Code: TX00DS95-3012

General information


Enrollment
05.05.2025 - 31.05.2025
Enrollment is ongoing
Enroll to the implementation in OMA
Timing
25.08.2025 - 12.10.2025
The implementation has not yet started.
Number of ECTS credits allocated
5 ECTS
Mode of delivery
On-campus
Unit
(2019-2024) Electricity and Automation Team
Campus
Leiritie 1
Teaching languages
Finnish
Degree programmes
Electrical and Automation Engineering
Teachers
Kai Virta
Teacher in charge
Raisa Kallio
Course
TX00DS95

Implementation has 19 reservations. Total duration of reservations is 62 h 0 min.

Time Topic Location
Mon 25.08.2025 time 11:00 - 13:00
(2 h 0 min)
Automaation sähköasennustekniikka TX00DS95-3012
MMB301 Auditorio 3 krs.
Mon 01.09.2025 time 11:00 - 13:00
(2 h 0 min)
Automaation sähköasennustekniikka TX00DS95-3012
MMB301 Auditorio 3 krs.
Thu 04.09.2025 time 12:00 - 16:00
(4 h 0 min)
Automaation sähköasennustekniikka TX00DS95-3012
MMC360 Sähkötekniikan laboratorio
Fri 05.09.2025 time 08:00 - 12:00
(4 h 0 min)
Automaation sähköasennustekniikka TX00DS95-3012
MMC360 Sähkötekniikan laboratorio
Mon 08.09.2025 time 11:00 - 13:00
(2 h 0 min)
Automaation sähköasennustekniikka TX00DS95-3012
MMB301 Auditorio 3 krs.
Thu 11.09.2025 time 12:00 - 16:00
(4 h 0 min)
Automaation sähköasennustekniikka TX00DS95-3012
MMC360 Sähkötekniikan laboratorio
Fri 12.09.2025 time 08:00 - 12:00
(4 h 0 min)
Automaation sähköasennustekniikka TX00DS95-3012
MMC360 Sähkötekniikan laboratorio
Mon 15.09.2025 time 11:00 - 13:00
(2 h 0 min)
Automaation sähköasennustekniikka TX00DS95-3012
MMB301 Auditorio 3 krs.
Thu 18.09.2025 time 12:00 - 16:00
(4 h 0 min)
Automaation sähköasennustekniikka TX00DS95-3012
MMC360 Sähkötekniikan laboratorio
Fri 19.09.2025 time 08:00 - 12:00
(4 h 0 min)
Automaation sähköasennustekniikka TX00DS95-3012
MMC360 Sähkötekniikan laboratorio
Mon 22.09.2025 time 11:00 - 13:00
(2 h 0 min)
Automaation sähköasennustekniikka TX00DS95-3012
MMB301 Auditorio 3 krs.
Thu 25.09.2025 time 12:00 - 16:00
(4 h 0 min)
Automaation sähköasennustekniikka TX00DS95-3012
MMC360 Sähkötekniikan laboratorio
Fri 26.09.2025 time 08:00 - 12:00
(4 h 0 min)
Automaation sähköasennustekniikka TX00DS95-3012
MMC360 Sähkötekniikan laboratorio
Mon 29.09.2025 time 11:00 - 13:00
(2 h 0 min)
Automaation sähköasennustekniikka TX00DS95-3012
MMB301 Auditorio 3 krs.
Thu 02.10.2025 time 12:00 - 16:00
(4 h 0 min)
Automaation sähköasennustekniikka TX00DS95-3012
MMC360 Sähkötekniikan laboratorio
Fri 03.10.2025 time 08:00 - 12:00
(4 h 0 min)
Automaation sähköasennustekniikka TX00DS95-3012
MMC360 Sähkötekniikan laboratorio
Mon 06.10.2025 time 11:00 - 13:00
(2 h 0 min)
Automaation sähköasennustekniikka TX00DS95-3012
MMB301 Auditorio 3 krs.
Thu 09.10.2025 time 12:00 - 16:00
(4 h 0 min)
Automaation sähköasennustekniikka TX00DS95-3012
MMC360 Sähkötekniikan laboratorio
Fri 10.10.2025 time 08:00 - 12:00
(4 h 0 min)
Automaation sähköasennustekniikka TX00DS95-3012
MMC360 Sähkötekniikan laboratorio
Changes to reservations may be possible.

Objective

After completing this course the student is able to independently work on installation issues related to the interfaces of automation and strong current technology. The student is able to interpret the connections between automation and electrical installations from drawings. The student is able to master changes and new installations in theory and in accordance with regulations.

The student is able to install various sensors, safety, protection and control devices, and to connect the above devices to an automation center, for example. The student is able to use installation items and draw up installation inspection protocols. The student has an understanding of the maintenance of electrical equipment.

Content

1. Electrical and automation drawings
2. Types of automation, telecommunication, installation and power cables, and earthing
3. The basics of electricity distribution and transmission in industry
4. Electrical substations at component level
5. Electrical measurements and maintenance of electrical equipment

Evaluation scale

0-5

Assessment criteria, satisfactory (1)

The student has achieved the course objectives fairly. The student will be able to identify, define and use the course subject area’s concepts and models. The student understands the criteria and principles of the expertise development. The student has completed the required learning exercises in minimum requirement level. His/her competences have developed in a way that he/she may complete the remaining studies in electrical engineering and automation technology and finally work in a suitable job position related to this field.

Assessment criteria, good (3)

The student has achieved the course objectives well, even though the knowledge and skills need improvement on some areas. The student has completed the required learning exercises in good or satisfactory level. The student is able to define the course concepts and models and is able to justify the analysis. The student is able to apply their knowledge in study and work situations. The student understands the importance of expertise in the field of electrical engineering and automation technology and is able to analyze his/her own expertise.

Assessment criteria, excellent (5)

The student has achieved the objectives of the course with excellent marks. The student master commendably the course subject area’s concepts and models. The student has completed the required learning exercises in good or excellent level. The student is able to make justified and fluent analysis and to present concrete development measures. The student is well prepared to apply their knowledge study and work situations. Students are able to analyze the expertise in electrical engineering and automation technology and the evolvement of their own expertise.

Assessment criteria, approved/failed

The student has achieved the course objectives fairly. The student will be able to identify, define and use the course subject area’s concepts and models. The student understands the criteria and principles of the expertise development. The student has completed the required learning exercises in minimum requirement level. His/her competences have developed in a way that he/she may complete the remaining studies in electrical engineering and automation technology and finally work in a suitable job position related to this field.

Go back to top of page