Degree Programme in Electronics: Syllabus
Code: TXA12S1
- Degree title
- Bachelor of Engineering, BEng
- Credits
- 240 ects
- Duration
- 4 years (240 ECTS)
- Start semester
- Autumn 2012
- Teaching language
- English
Descriptions
Degree Programme in Electronics
Level of qualification
Bachelor of Engineering
Qualification awarded
Bachelor of Engineering
Specific admission requirements
According to the university level requirements presented on the internet pages of the university of applied sciences.
Specific arrangements for recognition of prior learning
According to the general rules of the university of applied sciences.
Qualification requirements and regulations
240 ECTS credits to be completed according to the curriculum.
See the Degree Regulations of Helsinki Metropolia UAS: >>
Profile of the programme
The studies during the first two years of study are common to all students in the programme.
During the last two years the student has to complete the module studies according to his/her study plan, the innovation project, the final year project and the elective studies.
Key learning outcomes
Depend on the specialization
Occupational profiles of graduates
Depend on the specialization
Access to further studies
Access to Master's studies according to the entrance qualifications of the university.
Course structure diagram
The course structure diagram is specified in the programme study plan>>
Examination regulations, assessment and grading
Each course assessed using grading 0-5. Grade 0 = fail and grades 1-5 = pass. The assessment criteria are presented in each course description and the actual assessment methods depend on the teacher of the course.
Graduation requirements
240 ECTS credits to be completed according to the curriculum
Mode of study
The studies are full-time studies
Programme director
Heikki Valmu
heikki.valmu[at]metropolia.fi
Development
The advisory board of the Degree Programme in Electrical Engineering and Electronics has favoured the approval of the curriculum in their meeting on 29th of February 2012.
Further information
The studies of the first two years of study are common to all the students in this programme.
During the third and fourth year the students have to complete four professional study modules (each lasting one study period), the Innovation Project module (one semester), two sessions of Work Placement and finally the Bachelor's Thesis.
The students have to as well complete 10 credits of elective studies, which may be taken whenever during the studies.
The schedule of the last two years depends heavily on the selection of the professional modules and the time selected for the two industrial placement periods and the innovation project. The second half of the fourth year is dedicated for the Bachelor's Thesis.
It is possible to cover the Work Placement during summer time between semesters.
Specific admission requirements:
- according to the university level requirements presented on the internet pages of the university of applied sciences
Specific arrangements for recognition of prior learning:
- according to the general rules of the university of applied sciences
Qualification requirements and regulations:
- 240 ECTS credits to be completed according to the curriculum
Profile of the programme:
- the studies during the first the years of study are common to all students in the programme
- during the last two years the student has to complete the module studies according to his/her study plan, the innovation project, the final year project and the elective studies.
Key learning outcomes:
- depend on the specialization
Occupational profiles of graduates with examples:
- depend on the specialization
Access to further studies:
- access to Master's studies according to the entrance qualifications of the university
Examination regulations, assessment and grading:
- each course assessed using grading 0-5. Grade 0 = fail and grades 1-5 = pass. The assessment criteria is presented in each course description and the actual assessment methods depends on the teacher of the course.
Graduation requirements:
- 240 ECTS credits to be completed according to the curriculum
Mode of study (full-time, part-time…):
- the studies are full-time
Programme director or equivalent:
- Heikki Valmu; heikki.valmu@metropolia.fi
Select timing, structure or classification view
Show study timings by semester, study year or period
| Code | Name | Credits (ECTS) | 2012-2013 | 2013-2014 | 2014-2015 | 2015-2016 | Autumn 2012 | Spring 2013 | Autumn 2013 | Spring 2014 | Autumn 2014 | Spring 2015 | Autumn 2015 | Spring 2016 | 1. / 2012 | 2. / 2012 | 3. / 2013 | 4. / 2013 | 1. / 2013 | 2. / 2013 | 3. / 2014 | 4. / 2014 | 1. / 2014 | 2. / 2014 | 3. / 2015 | 4. / 2015 | 1. / 2015 | 2. / 2015 | 3. / 2016 | 4. / 2016 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TXA12S1-1000 |
Core Requirement Studies
(Choose all ) |
93 | ||||||||||||||||||||||||||||
| XX00AC54 | Introduction to Studies | 3 | ||||||||||||||||||||||||||||
| TX00AC76 | Introductory Project | 3 | ||||||||||||||||||||||||||||
| TX00AE01 | Finnish for Foreigners 1 | 3 | ||||||||||||||||||||||||||||
| TX00AE02 | Finnish for Foreigners 2 | 3 | ||||||||||||||||||||||||||||
| XX00AC52 | Swedish at Work | 3 | ||||||||||||||||||||||||||||
| XX00AC53 | Finnish as a Second Language: Finnish at Work | 3 | ||||||||||||||||||||||||||||
| TE00AC76 | Finnish Communication skills for Technology | 3 | ||||||||||||||||||||||||||||
| XX00AC51 | Professional English | 3 | ||||||||||||||||||||||||||||
| TX00AC78 | English Communication Skills for Electronics Engineering | 3 | ||||||||||||||||||||||||||||
| TX00AC79 | Linear Systems of Equations and Vectors | 3 | ||||||||||||||||||||||||||||
| TX00AC80 | Real Functions | 3 | ||||||||||||||||||||||||||||
| TX00AC81 | Complex Numbers and Complex Systems of Equations | 3 | ||||||||||||||||||||||||||||
| TX00AC82 | Differential Calculus | 3 | ||||||||||||||||||||||||||||
| TX00AC83 | Integral Calculus | 3 | ||||||||||||||||||||||||||||
| TX00AC84 | Integral Transforms | 3 | ||||||||||||||||||||||||||||
| TX00AC85 | Computer-aided Mathematics | 3 | ||||||||||||||||||||||||||||
| TX00AC86 | Signals | 3 | ||||||||||||||||||||||||||||
| TX00AC87 | Mechanics | 3 | ||||||||||||||||||||||||||||
| TX00AC88 | Electromagnetism | 3 | ||||||||||||||||||||||||||||
| TX00AC89 | Laboratory Exercises in Physics | 3 | ||||||||||||||||||||||||||||
| TX00AC90 | Thermal Physics and Waves | 3 | ||||||||||||||||||||||||||||
| TX00AC91 | Electromagnetic Induction and Wave Optics | 3 | ||||||||||||||||||||||||||||
| TX00AC92 | DC Circuits | 6 | ||||||||||||||||||||||||||||
| TX00AC93 | AC circuits | 3 | ||||||||||||||||||||||||||||
| TX00AC94 | Electrical Safety at Work | 3 | ||||||||||||||||||||||||||||
| TX00AC95 | Introduction to Electrical Power Engineering | 3 | ||||||||||||||||||||||||||||
| TX00AC96 | Computer-aided Design | 6 | ||||||||||||||||||||||||||||
| TX00AC97 | Introduction to Analog Electronics | 3 | ||||||||||||||||||||||||||||
| TX00AC98 | Introduction to Digital Electronics | 3 | ||||||||||||||||||||||||||||
| TXA12S1-1001 |
Professional Studies
(Choose all ) |
39 | ||||||||||||||||||||||||||||
| TX00AD30 | Analog Electronics; operational amplifier circuits | 6 | ||||||||||||||||||||||||||||
| TX00AD31 | Analog Electronics; transistor circuits | 3 | ||||||||||||||||||||||||||||
| TX00AC32 | Digital Electronics; sequential logic | 3 | ||||||||||||||||||||||||||||
| TX00AD35 | Introduction to Programming | 6 | ||||||||||||||||||||||||||||
| TX00AD33 | Microcontrollers and Embedded Programming | 6 | ||||||||||||||||||||||||||||
| TX00AD34 | Electric Measurements | 3 | ||||||||||||||||||||||||||||
| TX00AD36 | Electromagnetic Compatibility | 3 | ||||||||||||||||||||||||||||
| TX00AD37 | Radio Technology | 3 | ||||||||||||||||||||||||||||
| TX00AD38 | Telecommunications | 3 | ||||||||||||||||||||||||||||
| TX00AD39 | Production of Electronics | 3 | ||||||||||||||||||||||||||||
| TXA12S1-1002 |
Electronics
(Choose 0) |
0 | ||||||||||||||||||||||||||||
| TXA12S1-1007 |
Embedded Systems
(Choose all ) |
0 | ||||||||||||||||||||||||||||
| TXA12S1-1008 |
Sensors
(Choose all ) |
0 | ||||||||||||||||||||||||||||
| TXA12S1-1009 |
Wireless Communication
(Choose all ) |
0 | ||||||||||||||||||||||||||||
| TXA12S1-1010 |
Power Electronics
(Choose all ) |
0 | ||||||||||||||||||||||||||||
| TXA12S1-1011 |
Electronics and EMC
(Choose all ) |
0 | ||||||||||||||||||||||||||||
| TXA12S1-1003 |
Elective Studies
(Choose 0) |
0 | ||||||||||||||||||||||||||||
| TX00AE03 | Finnish for Foreigners 3 | 3 | ||||||||||||||||||||||||||||
| TXA12S1-1004 |
Innovation Project
(Choose all ) |
10 | ||||||||||||||||||||||||||||
| XX00AC55 | Innovation Project | 10 | ||||||||||||||||||||||||||||
| TXA12S1-1005 |
Work Placement
(Choose all ) |
30 | ||||||||||||||||||||||||||||
| TX00AD40 | Work Placement 1 | 15 | ||||||||||||||||||||||||||||
| TX00AD41 | Work Placement 2 | 15 | ||||||||||||||||||||||||||||
| TXA12S1-1006 |
Bachelor's Thesis
(Choose all ) |
15 | ||||||||||||||||||||||||||||
| TX00AD42 | Bachelor's Thesis | 15 | ||||||||||||||||||||||||||||
| Total | 240 | 63 | 63 | 34 | 30 | 28.5 | 34.5 | 30 | 33 | 19 | 15 | 15 | 15 | 12.8 | 15.8 | 17.3 | 17.3 | 16.5 | 13.5 | 18 | 15 | 14 | 5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 |
Due to the timing of optional and elective courses, credit accumulation per semester / academic year may vary.
polytechnics::bachelor level
Government Decree on Polytechnics (15.5.2003/352; 4 §)
Electronics: competences
Bachelor level::generic competences (2010)
Rectors' Conference of Finnish Universities of Applied Sciences (2010): recommendation for generic competences in bachelor level
|
Ethical Competence
- is able to take responsibility for one’s own actions and for the consequences of these actions |
| Introduction to Studies |
| Introductory Project |
| Finnish for Foreigners 1 |
| Finnish for Foreigners 2 |
| Swedish at Work |
| Finnish as a Second Language: Finnish at Work |
| Professional English |
| Finnish for Foreigners 3 |
| Innovation Project |
| Work Placement 1 |
| Work Placement 2 |
| Bachelor's Thesis |
|
Innovation Competence
- is able to conduct research, development and innovation projects applying the existing knowledge and methods of the field |
| Introduction to Studies |
| Introductory Project |
| Computer-aided Design |
| Innovation Project |
| Bachelor's Thesis |
|
Internationalization Competence
- possesses communicative competence necessary for one’s work and for professional development in the subject field |
| Introduction to Studies |
| Swedish at Work |
| Professional English |
| English Communication Skills for Electronics Engineering |
|
Learning Competence
- is able to self-evaluate and develop one’s competence and learning style orientation |
| Introduction to Studies |
| Introductory Project |
| Finnish for Foreigners 1 |
| Finnish for Foreigners 2 |
| Swedish at Work |
| Finnish as a Second Language: Finnish at Work |
| Professional English |
| Finnish for Foreigners 3 |
| Bachelor's Thesis |
|
Working Community Competence
- is able to operate as a member of a work community |
| Introduction to Studies |
| Introductory Project |
| Swedish at Work |
| Finnish as a Second Language: Finnish at Work |
| Professional English |
| Innovation Project |
| Work Placement 1 |
| Work Placement 2 |
| Bachelor's Thesis |
| Not grouped |
| Finnish Communication skills for Technology |
| Linear Systems of Equations and Vectors |
| Real Functions |
| Complex Numbers and Complex Systems of Equations |
| Differential Calculus |
| Integral Calculus |
| Integral Transforms |
| Computer-aided Mathematics |
| Signals |
| Mechanics |
| Electromagnetism |
| Laboratory Exercises in Physics |
| Thermal Physics and Waves |
| Electromagnetic Induction and Wave Optics |
| DC Circuits |
| AC circuits |
| Electrical Safety at Work |
| Introduction to Electrical Power Engineering |
| Introduction to Analog Electronics |
| Introduction to Digital Electronics |
| Analog Electronics; operational amplifier circuits |
| Analog Electronics; transistor circuits |
| Digital Electronics; sequential logic |
| Introduction to Programming |
| Microcontrollers and Embedded Programming |
| Electric Measurements |
| Electromagnetic Compatibility |
| Radio Technology |
| Telecommunications |
| Production of Electronics |